Prong snap button is made of brass material. The product is resistant to corrosion. It serves as the material for closing and opening of the nails with clipped shirts, work clothes, coats, overcoats, knitwear, Jean shirts and baby and children products by overlapping the two sides of the fabrics.

Prong Snap consists of 4 pieces.

These are;

• Prong snap button top,
• Socket,
• Stud,
• Nail prong snap,
  

Application;
In combination with special fastening molds;

• In hand press,
• In armed machine,
• In motored and automatic machines.

Measure ;

It is possible to manufacture the prong snap button in different sizes. Dimensions specified by Yasmin & Co Buttons are illustrated in the reference table

Logo;

Except on the stud part, no logo can be made on the top part of the prong snap  (You can contact  Yasmine &Co by filling the form on the contact page about logo printing).

Feature ;
Depending on the type of fabric to be applied, it can be selected as short or long legged prong snap buttons, or we can decide on the nail length of the prong snap by experimenting on the mock-ups you will send to Yasmine &Co. It is important that there is no pile difference in the fabric where the prong snap is applied. We can also provide you with information on how to press the prong snaps by preparing a data sheet report. The color variation of the prong-ring can be selected from the coating chart and produced in the desired colors.

Note: Any color can be made to order